Support Service: (205) 640-5181

PG-900

Highest Possible Production.
Lowest cost per ton
in the Industry.

Contact Us Find a Dealer
Your browser does not support SVGs
Download brochure

Lorem ipsum dolor sit amet.

Your browser does not support SVGs

PG-900

  • Transport Length
    18’-6” [5.64 m]
  • Trans. Length W/conveyor
    24’-9” [7.62 m]
  • Transport Height
    7’-7” [2.29 m]
  • Transport Width
    7’-5” [2.28 m]
  • Loading Height
    7’-7” [2.29 m]
  • Tongue Weight
    800-900 lbs. [362-408 kg]
  • Axle Weight
    9,400 lbs. [4,264 kg]
  • Gross Weight
    10,200 lbs. [4,826 kg]
  • Gross Weight W/conveyor
    10,900 lbs. [4,944 kg]
  • Horsepower
    200 to 230
  • Air Cleaner
    Donaldson Dry Type
  • Fuel Capacity
    30 gal. [114 l]
  • Clutch
    Wichita 11” [28 cm]
  • Fluid Coupler
    Transfluid 13 KRU
  • Drive Shaft
    Spicer 1410; Rated @820 ft -lb
  • Final Drive
    1:1, 2400 RPM
  • Hammer Swing Diameter
    26 1/4” [67 cm]
  • Hammer Rods
    1 1/2” [3.8 cm] Hardened Alloy Steel (6)
  • Hammers
    2” [5.08 cm] Thick, Machined to 1 7/8” [5 cm] in Hammer Swing Area
  • Opening
    35” X 25 3/8” [89 cm x 64.2 cm]
  • Length
    33 1/2” [84 cm]
  • Diameter
    16 7/8” [43 cm] With 9” [23 cm] Diameter Center
  • Inside Width
    6’-6” [2 m]
  • Flare Width
    7’-5” [2.29 m]
  • Depth
    38” [96 cm]
  • Walls
    3/8” [9.5 mm] Steel Plate with 1/8” [3.2 mm] Flares
  • Agitators
    Four 1/4 x 3” [.64 cm x 7.6 cm]
  • Speed
    Variable, Up to 6 RPM Forward and Reverse; Auto Reverses if Jammed, or RPMs below 1800
  • Drive
    10,000 in. lbs [1,130 nm] Torque; Triple-50 Chain, Overload Protected Hydraulic Motor
  • Augers
    Two 12” [30 cm] Hydraulic Driven
  • Optional Stacking Conveyor
    8’-0” [2.44 m] Long, 30” [76.2 cm] Wide, 6’-0” [1.8 m] Stacking Height
  • Controls
    Ignition, Engine Speed, Tub Controls, Augers/Conveyor Controls, Table Raise/Lower
  • Gauges
    Engine Temp, Voltmeter, Fuel Gauge, Tach/Hourmeter, Mill Hourmeter, Tub Pressure Gauge, Auger Pressure Gauge, Diagnostic Lights
  • Stacking Conveyor
    8’-0” [2.44 m] Long, 30” [76.2 cm] Wide, 6’-0” [1.8 m]
  • Magnetic Roller
    Magnetic Conveyor Drive Pulley with Nail Chute
  • Hammers
    12 1/2 lb [5.68 kg] Flail Hammer with Optional Replaceable Tip

Capabilities

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PG 900

There is nothing average about our base model. With its 200 to 230HP diesel engine, the 900 may be just the thing for your wood waste operation. It’s versatile, with different hammer options. The tub tilts 38 degrees for easy access to the hammermill, screens and lower auger area.

Like all of our industry-leading grinders, the 900 is designed for maximum productivity and low maintenance.

Specifications are listed at the time of publishing, may vary with equipment options and are subject to change without notice