PG-4000

Highest Possible Production.
Lowest cost per ton
in the Industry.

Download brochure

Lorem ipsum dolor sit amet.

PG-4000

Transport Height
39’-4” [12 m]
Transport Width
8’-5 1/2” [2.58 m]
Loading Height
10’-3” [3.12 m]
Tongue Weight
11,000 lbs. [4,989 kg]
Axle Weight
28,000 lbs. [12,698 kg]
Gross Weight
39,000 lbs. [17,687 kg]
Tongue Weight W/loader
16,500 lbs. [7,484 kg]
Axle Weight W/loader
33,000 lbs. [14,968 kg]
Gross Weight W/loader
49,500 lbs. [22,453 kg]

Horsepower
600-700HP [447-522kw]
Air Cleaners
Donaldson Dry Type
Fuel Capacity
200 gal. [757 l]

Clutch
Twin-Disc 14” [35.6 cm], 3 Plate
Fluid Coupling
Transfluid
Drive Shaft
Spicer 1880; Rated @5000 ft -lb [6,779 nm]
Final Drive
1:1, 2100 RPM

Screens
Four 1” [2.54 cm] Thick, 2400 SQ. IN. [1.55 sq. m];
Opening
27” X 48 1/4” [68.6 cm x 122.6 cm]
Deflector
1/2” [12.7 mm] Thick T-1 Steel Thrown Object Deflector
Diameter
16 7/8” [42.9 cm] With 8 1/4” [21.0 cm] Diameter Center
Mill Plates
2” [5.1 cm] Thick, Machined to 1 5/16” [3.3 cm] in Hammer Swing Area
Hammers
36 lb. [16.3 kg] Fixed W/2-Bolt Replaceable Tips (24); Heat Treated and Hard Surfaced
Hammer Swing Diameter
26 3/4” [68.0 cm]
Hammer Rods
2 1/4” [5.7 cm] Alloy Steel (12)
Bearings
4 7/16” [11.3 cm] Double Row Spherical; Ductile Cast Iron Housing; Oil Lubricated

Inside Width
8’-0” [2.4 m]
Flare Width
12’-0” [3.7 m], 11’-0” [3.4 m], or 10’-0” [3.0 m]
Depth
50” [1.3 m]
Walls
7/16” [11.1 mm] Channel; Six 1/2” [12.7 mm] Stiffeners Welded Vertically to Support Tub and Flares
Agitators
Eight 3/4” X 5” [19.0 mm x 127 mm]
Speed
Variable, Up to 9 RPM Forward and Reverse; Auto-Reverses if Jammed
Drive
18,000 in. lb. [2,034 nm] Torque; Single Orbital Hydraulic Motor; Planetary Gearbox; 140 Chain

Augers
Two 14” [35.6 cm] Hydraulic Driven
Stacking Conveyor
24’-6” [7.5 m] Long, 36” [0.91 m] Wide; 14’-0” [4.3 m] Stacking Height
Magnetic Roller
12” X 38” [30.5 cm x 96.5 cm] Magnetic Roller & Nail Chute

Controls
Ignition, Engine Speed, Clutch, Tub Controls, Outrigger Controls, Conveyor Controls, Table Control Gauges Oil Pressure, Oil Temp, Engine Temp, Voltmeter, Tach/Hourmeter, Mill Hourmeter, Fuel Gauge, Hydraulic Pressure Gauges
Reach
22’-6” [6.86 m]
Lift Capacity
8570 lbs. @ 10’ [3,887 kg @ 3.0 m] 5570 lbs. @ 15’ [2,526 kg @ 4.6 m] 4020 lbs. @ 20’ [1,823 kg @ 6.1 m]
Cab Controls
Pilot Operated Joystick Controls, Engine Speed, Clutch, Tub Controls, Conveyor Controls, Outrigger Controls, Cab Height Controls
Cab Gauges
Oil Pressure, Tachometer, Engine Temp, Fuel Gauge
Cab Features
1/2” [12.7 mm] Lexan Windshield, Wiper, Washer, Defroster, Dome Light, Fan, Horn, Insulation, Heater, Air Conditioner
Grapples
1/3 Cord Continuous Rotation

Fluid Drive
21” KPTO or Hydraulic Wet Clutch
Other
Air Compressor, ProCommand Remote Control

Capabilities

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PG4000

Bring on the tough stuff. You and your 4000 can tackle anything with total operator control and safety. The large air-conditioned cab unit allows full movement and lumbar supported seat for maximum comfort. Its thrown object deflector is one of many safety features and the turbo charged 580HP diesel engine will cut through green material like a boss.

An optional, full-function radio remote control allows you to operate the 4000 at a distant of up to 500 feet. It comes standard with an easy climb catwalk for access to the loader cab.

Specifications are listed at the time of publishing, may vary with equipment options and are subject to change without notice