Support Service: (205) 640-5181

PG-1000

Highest Possible Production.
Lowest cost per ton
in the Industry.

Contact Us Find a Dealer
Your browser does not support SVGs
Download brochure

Lorem ipsum dolor sit amet.

Your browser does not support SVGs

PG-1000

  • Transport Length W/14’ Conveyor
    30’-0” [9.2 m]
  • Transport Length W/20’ Conveyor
    26’-0” [8.9 m]
  • Transport Height
    12’-10” [3.9 m]
  • Transport Width
    8’-5” [2.6 m]
  • Loading Height
    9’-0” [2.7 m]
  • Tongue Weight
    2,200 lbs. [998 kg]
  • Axle Weight
    15,500 lbs. [7031kg]
  • Gross Weight
    17,500 lbs. [7938kg]
  • Clutch
    Twin-Disc SP214
  • Fluid Coupling
    Transfluid 17 KRU
  • Drive Shaft
    Spicer 1610; Rated @2200 ft -lb [2,983 nm]
  • Final Drive
    1:1, 2200 RPM
  • Opening
    35” X 25 7/16” [89 cm x 64.2 cm]
  • Length
    33 1/2” [84 cm]
  • Deflector
    1/2” [12.7 mm] Thick T-1 Steel Thrown Object Deflector
  • Diameter
    16 7/8” [43 cm] With 9” [23 cm] Diameter Center
  • Shaft
    5” [12.7 cm] Diameter Hardened Alloy Steel
  • Mill Plates
    2” [5.08 cm] Thick, Machined to 1 7/8” [4.75 cm] in Hammer Swing Area
  • Hammers
    Replaceable Tip Flail Hammer Standard; Optional 5 lb [2.27 kg] Flail Hammer Available; All Hammers Heat Treated and Hard Surfaced
  • Hammer Swing Diameter
    26 1/4” [66.68 cm]
  • Hammer Rods
    1 1/2” [3.8 cm] Hardened Alloy Steel (6)
  • Bearings
    2 15/16” [7.62 cm] Double Row Spherical
  • Inside Width
    6’-6” [2 m]
  • Flare Width
    8’-5” [2.6 m]
  • Depth
    48” [1.22 m]
  • Walls
    3/16” [4.75 mm] Steel Plate with 3/16” [4.75 mm] Flares
  • Agitators
    Four 3/8” X 3” [9.53 mm x 76.2 mm]
  • Speed
    Variable, Up to 10 RPM Forward and Reverse
  • Drive
    10,500 in. lbs. [1,186 nm] Torque; Overload Protected Hydraulic Motor, 4:1 Planetary Gearbox; Triple-50 Chain
  • Augers
    Two 12” [30.48 cm] Hydraulic Driven
  • Stacking Conveyor
    20’-0” [6.10 m] Long, 30” [76.2 cm] Wide; 12’-10” [3.9m] Stacking Height complete with magnetic drive pulley and nail chute
  • Controls
    Ignition, Engine Speed,Tub Controls, Augers/Conveyor Controls, Table Raise/Lower
  • Gauges
    Engine Temp, Engine Oil Pressure, Voltmeter, Fuel Gauge, Tach/Hourmeter, Tub Pressure Gauge, Auger Pressure Gauge
  • Screens
    Standard and Custom Sizes Available
  • Horsepower
    240-300HP [179-224kw]
  • Air Cleaners
    Donaldson Dry Type
  • Fuel Capacity
    60 gal. [227 l]

Capabilities

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PG1000

For efficiency, versatility, low noise and ease of maintenance, the 1000 can’t be beat. The 250HP diesel engine powers multiple hammer options and comes equipped with dual 12 inch hydraulically driven augers.

The fluid coupling clutch protection dramatically reduces clutch wear and virtually eliminates the possibility of clutch failure.

Specifications are listed at the time of publishing, may vary with equipment options and are subject to change without notice