Support Service: (205) 640-5181

PG-5200

Highest Possible Production.
Lowest cost per ton
in the Industry.

Contact Us Find a Dealer
Your browser does not support SVGs
Download brochure

Lorem ipsum dolor sit amet.

Your browser does not support SVGs

PG-5200

PG-5200 is available trailer or track mounted.

  • Transport Length
    44’ [13.41m]
  • Transport Height
    13’-6” [4.10 m]
  • Transport Width
    11’-11” [3.63 m]
  • Loading Height
    10’-9” [3.28 m]
  • Tongue Weight
    20,000 lbs. [9,072 kg]
  • Axle Weight
    54,000 lbs. [24,494 kg]
  • Gross Weight
    74,000 lbs [33,566 kg]
  • Tongue Weight W/ Loader
    26,500 lbs. [1,134 kg]
  • Axle Weight W/ Loader
    53,500 lbs. [24,267 kg]
  • Gross Weight W/ Loader
    80,000 lbs. [36,287 kg]
  • Horsepower
    875-1200HP [652-895kw]
  • Air Cleaners
    Donaldson Dry Type
  • Fuel Capacity
    450 gal. [1,704 L]
  • Fluid Drive
    Hydraulic Wet Clutch
  • Drive Shaft
    Spicer 1910
  • Final Drive
    1:1, 2100 RPM
  • Opening
    27” x 63” [686 x 1600 mm]
  • Length
    60” [1.5 m]
  • Diameter
    16 7/8” [429 mm] O.D. with 8 1/4” [210 mm] Diameter Center
  • Shaft
    7” [178 mm] Diameter Hardenend Alloy Steel
  • Mill Plates
    2” [51 mm] Thick, Machined to 1 15/16” [49 mm] in Hammer Swing Area
  • Hammers
    (32) 36 lb. [16.3 kg] Fixed w/2-Bolt Replaceable Tips Heat treated and Hard Surfaced
  • Hammer Swing Diameter
    26 3/4” [680 mm]
  • Hammer Rods
    (12) 2 1/4” [57 mm] Diameter Alloy Steel
  • Bearings
    4 7/16” [113 mm] Double Row Sperical w/ Heat Monitoring System and Custom Ductile Cast Iron Housing
  • Screen Size
    3,100 sq. in. [2.0 sq. m]
  • Inside Width
    10’-0” [3 m]
  • Flare Width
    13’ [3.96 m]
  • Depth
    56” [1.4 m]
  • Walls
    7/16” [11.1 mm] Steel Channel w/ Eight (8) 3/4” [19 mm] Stiffeners Welded Vertically to Support Tub and Flares
  • Fin Agitators
    Six (6) 3/4” x 5” [19 mm x 127 mm]
  • Speed
    Variable, Up to 9 RPM Forward and Reverse; Auto-Reverse if Jammed
  • Drive
    Tub Rotates by two (2) Hydraulic Piston Motors, Each Directly Driving a 140 DC Chain
  • Augers
    Three (3) 12” [305 mm] Hydraulicly Driven and Reversible
  • Stacking Conveyor
    60” [152 mm] x 26’ [7.9 m] Long x 15’ [4.6 m] Stacking Height
  • Magnetic Pulley
    12” x 62” [305 x 1575mm] Magnetic Pulley w/ Nail Chute
  • Controls / Gauges
    Dust and Water Resistamt Shock-Mounted Control Box w/ Sauer Plus 1 System and Smart Display Panel to Include All Operating and Diagnostic Data.
  • Reach
    25’-1” [7.64 m]
  • Lift Capacity
    9650 lbs. [4377 kg] @ 10’ [3.05 m] 6650 lbs. [3016 kg] @ 15’ [4.57 m] 5100 lbs. [2313 kg] @ 20’ [6.10 m]
  • Cab Controls
    Electric Operated Joystick Controls; Engine Speed; Clutch, Tub, Conveyor, Outrigger and Cab Height Controls.
  • Cab Gauges
    All included in Control Panel Display
  • Cab Features
    1/2” [13 mm] Lexan Windshield, Wiper, Washer, Defroster, Dome Light, Fan, Horn, Insulation, Heater, Air Conditioner, Raises for Loading
  • Grapples
    1/3 Cord Bypass or Claw. Continuous Rotation
  • Screens
    Various Standard and Custom Sizes Available.
  • Other
    Air Compressor, Radio Remote Control, Auto-Reversing Fan.

Capabilities

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PG5200

Our bold new 5200, available in trailer or track mount, contains one of the most aggressive hammermills in the industry. It can cut through mountains of green waste at production rates of over 100 tons-per-hour! The special double-bolt hammer tips provide more durability and grinding ease, assuring high production rates, less wear on the hammermill and easy maintenance. It’s been called the most powerful, easy to use tub grinder in the industry.

The 5200 is operated by a dust and water-resistant, shock-mounted control box with a Sauer Plus 1 system, CAN+ radio remote controls and a smart display panel. The enclosed, wet hydraulic clutch is engaged from the control panel with fault indicators using a push button microprocessor.

Many of our customers choose the knuckle boom loader option, complete with air-conditioned cab (standard) and state-of-the-art joystick.

Specifications are listed at the time of publishing, may vary with equipment options and are subject to change without notice