Support Service: (205) 640-5181

PG-4000

Highest Possible Production.
Lowest cost per ton
in the Industry.

Contact Us Find a Dealer
Your browser does not support SVGs
Download brochure

Lorem ipsum dolor sit amet.

Your browser does not support SVGs

PG-4000

  • Transport Height
    39’-4” [12 m]
  • Transport Width
    8’-5 1/2” [2.58 m]
  • Loading Height
    10’-3” [3.12 m]
  • Tongue Weight
    11,000 lbs. [4,989 kg]
  • Axle Weight
    28,000 lbs. [12,698 kg]
  • Gross Weight
    39,000 lbs. [17,687 kg]
  • Tongue Weight W/loader
    16,500 lbs. [7,484 kg]
  • Axle Weight W/loader
    33,000 lbs. [14,968 kg]
  • Gross Weight W/loader
    49,500 lbs. [22,453 kg]
  • Horsepower
    600-700HP [447-522kw]
  • Air Cleaners
    Donaldson Dry Type
  • Fuel Capacity
    200 gal. [757 l]
  • Clutch
    Twin-Disc 14” [35.6 cm], 3 Plate
  • Fluid Coupling
    Transfluid
  • Drive Shaft
    Spicer 1880; Rated @5000 ft -lb [6,779 nm]
  • Final Drive
    1:1, 2100 RPM
  • Screens
    Four 1” [2.54 cm] Thick, 2400 SQ. IN. [1.55 sq. m];
  • Opening
    27” X 48 1/4” [68.6 cm x 122.6 cm]
  • Deflector
    1/2” [12.7 mm] Thick T-1 Steel Thrown Object Deflector
  • Diameter
    16 7/8” [42.9 cm] With 8 1/4” [21.0 cm] Diameter Center
  • Mill Plates
    2” [5.1 cm] Thick, Machined to 1 5/16” [3.3 cm] in Hammer Swing Area
  • Hammers
    36 lb. [16.3 kg] Fixed W/2-Bolt Replaceable Tips (24); Heat Treated and Hard Surfaced
  • Hammer Swing Diameter
    26 3/4” [68.0 cm]
  • Hammer Rods
    2 1/4” [5.7 cm] Alloy Steel (12)
  • Bearings
    4 7/16” [11.3 cm] Double Row Spherical; Ductile Cast Iron Housing; Oil Lubricated
  • Inside Width
    8’-0” [2.4 m]
  • Flare Width
    12’-0” [3.7 m], 11’-0” [3.4 m], or 10’-0” [3.0 m]
  • Depth
    50” [1.3 m]
  • Walls
    7/16” [11.1 mm] Channel; Six 1/2” [12.7 mm] Stiffeners Welded Vertically to Support Tub and Flares
  • Agitators
    Eight 3/4” X 5” [19.0 mm x 127 mm]
  • Speed
    Variable, Up to 9 RPM Forward and Reverse; Auto-Reverses if Jammed
  • Drive
    18,000 in. lb. [2,034 nm] Torque; Single Orbital Hydraulic Motor; Planetary Gearbox; 140 Chain
  • Augers
    Two 14” [35.6 cm] Hydraulic Driven
  • Stacking Conveyor
    24’-6” [7.5 m] Long, 36” [0.91 m] Wide; 14’-0” [4.3 m] Stacking Height
  • Magnetic Roller
    12” X 38” [30.5 cm x 96.5 cm] Magnetic Roller & Nail Chute
  • Controls
    Ignition, Engine Speed, Clutch, Tub Controls, Outrigger Controls, Conveyor Controls, Table Control Gauges Oil Pressure, Oil Temp, Engine Temp, Voltmeter, Tach/Hourmeter, Mill Hourmeter, Fuel Gauge, Hydraulic Pressure Gauges
  • Reach
    22’-6” [6.86 m]
  • Lift Capacity
    8570 lbs. @ 10’ [3,887 kg @ 3.0 m] 5570 lbs. @ 15’ [2,526 kg @ 4.6 m] 4020 lbs. @ 20’ [1,823 kg @ 6.1 m]
  • Cab Controls
    Pilot Operated Joystick Controls, Engine Speed, Clutch, Tub Controls, Conveyor Controls, Outrigger Controls, Cab Height Controls
  • Cab Gauges
    Oil Pressure, Tachometer, Engine Temp, Fuel Gauge
  • Cab Features
    1/2” [12.7 mm] Lexan Windshield, Wiper, Washer, Defroster, Dome Light, Fan, Horn, Insulation, Heater, Air Conditioner
  • Grapples
    1/3 Cord Continuous Rotation
  • Fluid Drive
    21” KPTO or Hydraulic Wet Clutch
  • Other
    Air Compressor, ProCommand Remote Control

Capabilities

ProGrind Tub Grinders offer industry-leading, user-friendly controls, clutch protection and a variety of hammer options for grinding versatility. The tub on each model tilts up to 90 degrees for easy access to the hammermill, screens and lower auger area. Precision Husky offers six rugged models, each built with ease of operation, cost and – always – your productivity in mind.

PG4000

Bring on the tough stuff. You and your 4000 can tackle anything with total operator control and safety. The large air-conditioned cab unit allows full movement and lumbar supported seat for maximum comfort. Its thrown object deflector is one of many safety features and the turbo charged 580HP diesel engine will cut through green material like a boss.

An optional, full-function radio remote control allows you to operate the 4000 at a distant of up to 500 feet. It comes standard with an easy climb catwalk for access to the loader cab.

Specifications are listed at the time of publishing, may vary with equipment options and are subject to change without notice